Archive for ‘ July, 2016 ’

Astra J VXR Stage 3

A change to the more common Astra J VXRs we see in Arden Blue, this time in the much less seen but equally stunning Power Red.

The car had already been fitted with a full 3″ Piper turbo back exhaust system and an Airtec cooler and induction kit when it arrived with us and when benchmarked produced 300bhp and 348 lb ft torque when benchmarked, although with a noticeably bouncing boost curve between 3-4,000 rpm due to the factory software, which was reflected inthe power and torque curves.

Once mapping was completed the results were a very respectable 340 bhp and 381 lb ft, after we had fitted our own air flow meter inlet housing and AEM dryflow cone filter which allowed the car to produce an extra 3 bhp and 10 lb ft torque over the original induction kit that had been fitted on the car.

Our free flowing air flow meter housing was specifically developed for the Astra J VXR on our rolling road and features a built in air straightener so correct air mass values which are relayed to the ECU, and able to help this car reach higher numbers.

Astra J VXR Mapping

Astra J VXR Mapping

More Astra J VXR Mapping

Another Astra J VXR in for mapping, in the ever popular blue, this time from another repeat customer who was more than pleased with work we carried out to his previous car a Vectra VXR.

Already fitted with an induction kit and our 3″ pre-cat removal pipe the car came in for mapping and full rolling road set up.

Astra J VXR Mapping Session

Astra J VXR Mapping Session

The final figures were up from 280bhp and 324 lb ft to 325 bhp and 365 lb ft torque.

Opel Speedster Turbo K06 and Inlet Manifold

This car had previously been in for a full engine rebuild with forged pistons and steel rods, strengthening the factory Z20LET engine and was running a K04 Z20LEH VXR turbocharger, Milltek 63.5mm exhaust system, Pro Alloy chargecooler and VXR injectors.

It returned to us to have some further enhancements which included a full 76mm Tullett exhaust system, a K06 turbocharger, Courtenay Klasen inlet manifold, uprated clutch and 80mm air flow meter.

After mapping and a full rolling road set up it is now producing 334bhp and 340lb ft torque, and is very at home on the track where it spends most of its ‘working’ life.

VX220 Turbo Mapping

VX220 Turbo Mapping

The Courtenay Sport Blog

%d bloggers like this: