Application Instructions

(1) Make sure surface is clean and dry.

(2) Carefully remove sticker and protective application film from backing paper ensuring that nothing is left behind.

(3) Position sticker (still covered by film) onto required area and gently rub over with credit card,  squeegee or soft cloth and fingers from the centre to the edges to remove any air.

(4) Carefully remove application film.

Always apply graphics in warm conditions. Gently warming the graphic(s) and the application surface in colder conditions will help.

Larger Graphics/sunstrips can be applied with a light film of water from a trigger spray with about 2 or 3 drops of washing up liquid in the solution. Do not over wet the surface. Position graphic and ensure you squeegee as much water out as possible otherwise the decal will not stick to the surface. If any part of the graphic lifts when the surface film is removed, return it carefully to the surface and re-apply as before. 

No responsibility will be taken for incorrectly applied graphics or for any damage to surfaces howsoever caused.