Engine Mount / Lower Torque Mount Bush Kit - i30N Performance

New Available Yellow Poly Mount
Yellow Poly Mount
Fitting Information >>>> PDF Download <<<<

This mount replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response.

PFF26-120 (Yellow Material) With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles.

PFF26-120P (Purple Material) The Purple 80A material makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved.

PFF26-120BLK (Black Material) Uses the Black 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs but an increase in NVH should be expected when fitting.

OE Part Number: 21950-S000

To suit the variable requirements of the i30N driver, this part is available in three different ratings of shore hardness to balance performance requirements. Whilst an increase in material stiffness will reduce engine movement, additional noise and vibration may be felt.

Yellow Shore A 70 is an upgraded replacement for the original bush, recommended for fast road use

Purple Shore A 80 is a stiffer material to suit higher powered cars that may be used on the track

Black Shore A 95 is our Black Series part for extreme Track and Motorsport applications for ultimate engine stability

Final Image is a graph showing Load vs Displacement of each of our materials compared with the original rubber bush


Enquiry Form.

Write a review

Please login or register to review
  • Views: 109
  • Product Code: PFF26-120
  • Availability: Available
  • £28.74
  • Ex Tax: £23.95

Available Options

Please Note: Plugs are listed individually.The Best Plugs to use for 1.6 Turbo (Z16LEx/A16LEx/B16LER..
£8.25
Ex Tax: £6.88
Uprated Exhaust Mount manufactured from a high temperature polyurethane material in red with a Shore..
£7.20
Ex Tax: £6.00
Shim for M32 Late Type End Case.To ensure correct shimming of the gearbox when fitting the later end..
£2.40
Ex Tax: £2.00
Genuine Vauxhall/Opel Clutch Cover to Flywheel Bolt for Z20LEH, Z20LEL, Z20LER 2.0 Turbo Turbo engin..
£0.60
Ex Tax: £0.50
Hydraulic Lifter, Genuine Vauxhall / Opel Original Equipment Part.Suitable for all:2.0 N/A and Turbo..
£7.50
Ex Tax: £6.25
Clutch Cover to Flywheel Bolt (M7x22) for C20LET and C20XEPreviously: 904441486 Required per Clutch..
£0.60
Ex Tax: £0.50
This mount replaces the original rubber bush for increased engine stability under acceleration and b..
£28.74
Ex Tax: £23.95
EBC Ultimax2 Brake Pad Set FRONT for:Astra H with 308mm Front Discs 2.0 Turbo 170PS/200PS / 1.9CDTi ..
£27.00
Ex Tax: £22.50
Longer Bolts and Studs required for fitting a Thermal Inlet Gasket to the 1.6 Turbo engine.For: Z16L..
£10.37
Ex Tax: £8.64
Genuine Bosch Inlet Manifold Pressure Sensor for 1.6 Turbo Z16LEx/A16LEx/B16LEx and 2.0 Turbo Z20LEx..
£42.00
Ex Tax: £35.00
EBC Redstuff Pads for K Sport 8 Pot (330 and 356mm kits) and D2 6 pot (330mm and 356mm kits)Calipers..
£114.60
Ex Tax: £95.50
Genuine Vauxhall/Opel Boxed Part.Heated Right Hand Side Side Door Mirror Glass (Aspheric) for Right ..
£20.70
Ex Tax: £17.25