Hyundai i30N Gen 2 Turbo including Hot Pipe Bracket Adaption Kit & Stage 1 Upgrade
Generation 2 Hyundai i30N Turbo Charger complete with inlet casting.
Stage 1 Upgrade Bearings & Seals
Hot Pipe Bracket Adaptor Kit
Gaskets & Washers
We can supply and fit the Generation 2 turbo as a package that includes the following:
Generation 2 Turbo Complete with inlet casting.
Hot pipe relocation kit.
Turbo to front pipe stud and nut kit.
Oil & filter change with Millers fully synthetic oil.
Fully installed and fitted with genuine Hyundai gaskets and seals.
Genuine Hyundai i30N Generation 2, Stage 1 Turbo Charger including Hot Pipe Bracket Adaptor Kit, Gaskets & Washers.
With the Generation 2 Turbo Hyundai have done much more than simply tweak the compressor and exhaust wheels, it is a complete re think, the manifold and exhaust housings are much larger and the turbo rotation direction has been reversed for improved flow through the exhaust manifold and exhaust housing. The compressor and exhaust wheels are larger in size and the inlet on the compressor housing has increased in size from 53 to 56 mm which means that the bolt on 90 degree alloy inlet casting now matches it in size removing the previous 1.5mm step thus smoothing the air transition up to the compressor wheel.
To the above specification we have further enhanced the turbo adding our Stage 1 Upgrade this consists of an uprated twin feed oversize 360d thrust bearing, oversized thrust collar and a staggered oil seal for increased durability, which is particularly useful on track and mapped cars.
The turbo is supplied with the Hot Pipe Bracket Adaption Kit, gaskets and Stage 1 upgrade.
Gen Turbo Specification Changes in Brief
Turbine Compressor Wheel (cold side) +4mm
Exhaust Wheel (hot side) +6mm
Turbo inlet up from 53 to 56mm to match the 90 degree bend inlet casting.
Width on manifold collector +14 mm
IMPORTANT NOTES WHEN FITTING A GEN 2 TURBO TO A GEN 1 CAR & Hot Pipe Adaption kit.
The rigid alloy boost pipe that bolts onto the turbo and snakes down to the bottom of the engine bay has a bracket on it, the generation 2 turbo shifts the orientation slightly, so this bracket does not align to its mounting point on the gearbox. Without this bracket in place under both acceleration and deceleration as the engine rocks back and forth the pipe will apply leverage to the compressor housing. The compressor housing is V band mounted to the turbo core and seals with an expansion washer, the un-bracketed boost pipe will twist the compressor housing and potentially over time cause contact between to compressor wheel and cover damaging the turbocharger.
We have made an adaption bracket that secures the pipe back to the original fixing point to stop this. Also in the kit are 2 spacers and and additional fixings to lower the undertray slightly so the hot boost pipe leading to the intercooler clears the under tray.
NB: The Hyundai retail price for this unit is £2450.00. We have secured these turbos at a much reduced price.