Alloy Bottom Pulley Multi V Underdrive With Flange - Z20LEx FWD X20XEV

Alloy Underdrive Pulley With Flange
Alloy Underdrive Pulley With Flange

Underdrive Alloy Bottom Pulley for Z20LEx engines. With Rear Protection Flange.

The standard bottom pulley is constructed around a rubber centre donut which is bonded to a steel centre section. Over time the rubber can split, which causes the pulley to wobble. This can throw the fan belt particularly on engines that are operating at high RPM. Our alloy pulley cures this problem and is machined from solid billet alloy. It also weighs less than the OE item.

This pulley is machined with a rear protection flange (shown in the image below) for cambelt protection to help prevent any foreign material ingress into the cambelt area. Where an underdrive pulley without a rear flange is fitted there is an exposed opening into the cambelt area which could allow in debris and cause engine failure.

Specifically designed for Front Wheel Drive Z20LEx applications.

Can be used with aircon or when removing aircon.

Keeping Aircon:
Can be used to replace the factory bottom pulley on Front Wheel Drive Cars, however this will need a slightly shorter belt than the factory belt when keeping the aircon in place. Choose Belt Option 5PK1645

Aircon Delete:
Can also be used where aircon is being removed on Front Wheel Drive vehicles, with a direct route belt from pulley to alternator. When doing this choose Belt Option 5PK858.

Fitment:
Underdrive pulley suitable for ALL Z20LEx engines (Z20LET/Z20LEL/Z20LER/Z20LEH)
Astra G/Astra H
Zafira A/Zafira B

Will also fit Astra G X20XEV/X20XER engines.

Additional Image shows underdrive pulley without rear protection flange and exposed cambelt area outlined in red.

Approx Weight: 520g

Enquiry Form.

Write a review

Please login or register to review
  • Views: 5470
  • Product Code: UDPF1505
  • Availability: 2
  • £114.00
  • Ex Tax: £95.00

Available Options

Tags: Alloy Bottom Pulley, Bottom Pulley

Multi V Belt Tensioner and Roller. Z20LEx engines Genuine Vauxhall/Opel Tensioner..
£60.00
Ex Tax: £50.00
Front Brake Caliper to Hub Carrier/Steering Knuckle Retaining Bolt for OE CalipersM12 x 1.5 x 35 (10..
£3.30
Ex Tax: £2.75
Black Plastic Oil Filler Cap. Replaces existing yellow cap where fitted. OE to some later Vauxhall m..
£3.15
Ex Tax: £2.63
Inlet Manifold Stud. M8. Overall Length 50mm. Replacement stud for the factory inlet manifold stu..
£1.20
Ex Tax: £1.00
Copper Securing Nut for Inlet / Exhaust Manifold Stud. Z20LEx engine. M8 - 12mm Across Flats. For..
£0.84
Ex Tax: £0.70
Please Note: Plugs are listed individually.The Best Plugs to use for 1.6 Turbo (Z16LEx/A16LEx/B16LER..
£8.25
Ex Tax: £6.88
Shim for M32 Late Type End Case.To ensure correct shimming of the gearbox when fitting the later end..
£2.40
Ex Tax: £2.00
Uprated Exhaust Mount manufactured from a high temperature polyurethane material in red with a Shore..
£7.20
Ex Tax: £6.00
Genuine OE Vauxhall/Opel Valve Stem Oil Seal.Vauxhall/Opel Part Number: 90410741For the Z20LEx famil..
£1.50
Ex Tax: £1.25
Clutch Cover to Flywheel Bolt (M7x22) for C20LET and C20XEPreviously: 900652946 Required per Clutch..
£0.60
Ex Tax: £0.50
Crankshaft Bearing/Main Bearing Bolt for Z20LEx engines.Torx Screw for Crankshaft Bearing Cover to C..
£1.80
Ex Tax: £1.50
The redesigned Competition Gen.2intercooler for Hyundai I30 Nnow available with TÜV certificate..
£699.00
Ex Tax: £582.50
K&N Flexible Hose Kit is for use on Apollo Universal Air Intakes.  One end of the hose is d..
£32.95
Ex Tax: £27.46
Red Line MT-LV 70W75 GL4 Fully Synthetic Gear OilOffers quicker shifts, a perfect synchronizer coeff..
£21.40
Ex Tax: £17.83
The Wagner High-Performance Intercooler has got a new performance core (bar & plate) with the di..
£598.99
Ex Tax: £499.16
Genuine Hyundai Motorsport high pressure fuel pump as used on i30 N TCR.  Uprated internals to ..
£789.00
Ex Tax: £657.50