Pistons Forged Wossner and H-Beam Steel Rods - Z20LEx Turbo Set of 4

7-10 Days Pistons Forged Wossner and H-Beam Steel Rods - Z20LEx Turbo Set of 4
Pistons Forged Wossner and H-Beam Steel Rods - Z20LEx Turbo Set of 4

4 x Wosser Forged Pistons, 4 x Piston Ring Sets, 4 x Gudgeon Pins with circlips
4 x Steel Rods, 1 Set ARP Rod Bolts

We can carry out a full engine rebuild in our workshop. Please contact us for details.

Wossner Forged Piston and H-Beam Steel Rod Package. 

The pistons feature a unique Moly coating on the skirts which allows the builder to run a much closer piston to bore tolerance than might be required on other piston makes. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances.

The piston crowns are mirror polished to better resist detonation on a high performance engine. Mirror polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns.

Includes piston rings and gudgeon pins. No need to purchase extras, this package allows you to fit Forged pistons seamlessly.

Compression Ratio - 8.5:1

Bore Sizes: 86mm, 86.5mm, 87mm

Package includes Uprated H-Beam Steel Rods complete with uprated rod bolts.

H-Beam Con Rods are stiffer and more ridged which makes them better suited to high power/higher torque engines for example high power turbo builds. Our lightweight, H-beam section connecting rods are forged from 4340 high tensile steel. Heat treated and fully shot-peened for higher fatigue strength. Small end bushed for fully floating pin and big end fitted with high quality ARP fasteners.

Suitable for Z20LEx (Z20LET, Z20LEL, Z20LER and Z20LEH)

Important Note:
For any engine rebuild we recommend and use oversize pistons (86.5mm) which require a mild rebore and hone to ensure correct piston to bore clearance to allow the pistons and bores bed in correctly.

Using standard sized pistons (86mm) in bores that have already been subject to wear (i.e. use) or bores that have not been machined to the specified clearances of the pistons, will lead to pistons and bores not bedding in properly and an engine that may be subject to high oil consumption.

Standard sized pistons recommended for use in Brand new engines only.

Enquiry Form.

Write a review

Please login or register to review
  • Views: 3813
  • Product Code: WPHB20
  • Availability: 7-10 Days
  • £987.00
  • Ex Tax: £822.50

Available Options

Please Note: Plugs are listed individually.The Best Plugs to use for 1.6 Turbo (Z16LEx/A16LEx/B16LER..
£8.25
Ex Tax: £6.88
Following some extensive hot summer (26°C plus) testing and development both in the UK and Europe, C..
£825.00
Ex Tax: £687.50
High Flow Inlet Manifold designed for ALL Z20LEx petrol turbo enginesThe Courtenay Klasen High Flow ..
£500.00
Ex Tax: £416.67
Ultra High Performance Metal Multi Layer Head Gasket. For high horsepower engine rebuilds.4 Layers, ..
£159.00
Ex Tax: £132.50
K06 Turbocharger for Z20LEX 2.0 Turbo engines - Hybrid Turbo.Reworked from a brand new K04 unit feat..
£1,045.00
Ex Tax: £870.83
Silicone Ancillary Water Hose Kit for Astra H 2.0 Turbo Z20LEL/Z20LER and VXR Z20LEH Models.Includes..
£82.00
Ex Tax: £68.33
Shim for M32 Late Type End Case.To ensure correct shimming of the gearbox when fitting the later end..
£2.40
Ex Tax: £2.00
Uprated Exhaust Mount manufactured from a high temperature polyurethane material in red with a Shore..
£7.20
Ex Tax: £6.00
Genuine OE Vauxhall/Opel Valve Stem Oil Seal.Vauxhall/Opel Part Number: 90410741For the Z20LEx famil..
£1.50
Ex Tax: £1.25
Clutch Cover to Flywheel Bolt (M7x22) for C20LET and C20XEPreviously: 900652946 Required per Clutch..
£0.60
Ex Tax: £0.50
Crankshaft Bearing/Main Bearing Bolt for Z20LEx engines.Torx Screw for Crankshaft Bearing Cover to C..
£1.80
Ex Tax: £1.50
Z20GenX Integral exhaust manifold for Z20LET Z20LEL Z20LER Z20LEH engines, the ultimate plug and pla..
£799.00
Ex Tax: £665.83
The redesigned Competition Gen.2intercooler for Hyundai I30 Nnow available with TÜV certificate..
£699.00
Ex Tax: £582.50
K&N Flexible Hose Kit is for use on Apollo Universal Air Intakes.  One end of the hose is d..
£32.95
Ex Tax: £27.46
Red Line MT-LV 70W75 GL4 Fully Synthetic Gear OilOffers quicker shifts, a perfect synchronizer coeff..
£21.40
Ex Tax: £17.83
The Wagner High-Performance Intercooler has got a new performance core (bar & plate) with the di..
£598.99
Ex Tax: £499.16