Wossner Forged Piston & Steel Rod Kit For Hyundai i30N Set of 4

Wossner Forged Piston & Steel Rod Kit For Hyundai i30N Set of 4
Wossner Forged Piston & Steel Rod Kit For Hyundai i30N Set of 4

4 x Wosser Forged Pistons, 4 x Piston Ring Sets, 4 x Gudgeon Pins with circlips
4 x Steel Rods, 1 Set ARP Rod Bolts

Wossner Forged Piston & Pec Steel Rod Package, for Hyundai i30N & N performance, Generation 1 & 2 Cars

The Wossner pistons for the i30 feature a unique Moly coating on the skirts which allows the builder to run a much closer piston to bore tolerance than might be required on other piston makes. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances.

The piston crowns are mirror polished to better resist detonation on a high performance engine. Mirror polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns.

Includes piston rings and gudgeon pins. 


PEC's H-Beam section connecting rods for the Hyundai i30 are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners & ARP Ultra Torque assembly lubricant.as a matched balanced set..

H-Beam Conrods are stiffer and more ridged which makes them better suited to high power/higher torque engines for example high power turbo builds.




Important Note:
For any engine rebuild we recommend and use oversize pistons (86.5mm) which requires a mild re-bore and plateau hone to ensure correct piston to bore clearance to allow the pistons and bores bed in correctly.

Using standard sized pistons (86mm) in bores that have already been subject to wear (i.e. use) or bores that have not been machined to the specified clearances of the pistons, inevitably lead to pistons being noisy particularly on cold start and the bores not bedding in properly, which results in high oil consumption.

Standard sized pistons recommended for use in Brand new engines or as new engine only.

Enquiry Form.

Write a review

Please login or register to review
  • £1,440.00
  • Ex Tax: £1,200.00

Available Options

Tags: Hyundai Forged Piston & PEC Steel Rod Kit

Please Note: Plugs are listed individually.The Best Plugs to use for 1.6 Turbo (Z16LEx/A16LEx/B16LER..
£9.25
Ex Tax: £7.71
Genuine OE Vauxhall/Opel Valve Stem Oil Seal.Vauxhall/Opel Part Number: 90410741For the Z20LEx famil..
£1.50
Ex Tax: £1.25
Shim for M32 Late Type End Case.To ensure correct shimming of the gearbox when fitting the later end..
£2.40
Ex Tax: £2.00
Uprated Exhaust Mount manufactured from a high temperature polyurethane material in red with a Shore..
£10.80
Ex Tax: £9.00
Laser Iridium NGK manufactured Spark Plugs for 2.0 Turbo A20NFT[LHU] A..
£14.40
Ex Tax: £12.00
NGK BKR7EIX Iridium Spark Plugs. Offer an enhanced spark over the standard items, and are 'cooler..
£9.00
Ex Tax: £7.50
Astra J VXR Genuine Vauxhall Opel front hub and wheel bearing assembly ..
£96.00
Ex Tax: £80.00
SPECIAL OFFERMilltek Cat Back GPF Delete Exhaust System.  This system was used for testing on o..
£1,646.94 £999.00
Ex Tax: £832.50
 Z19DTH 1.9 CDTi Diesel Engine Direct Replace No Wiring Mods Needed Upgrades The Original ..
£141.92
Ex Tax: £118.27
 Z19DTH 1.9 CDTi Diesel Engine Direct Replace No Wiring Mods Needed Upgrades The Original ..
£83.50
Ex Tax: £69.58
Gear Shift Cable Corsa D VXR Genuine Vauxhall - Opel Part. There are 2 cables fitted to the car this..
£24.00
Ex Tax: £20.00
Gear Shift Cable Corsa D VXR Genuine Vauxhall - Opel Part. There are 2 cables fitted to the car this..
£24.00
Ex Tax: £20.00