Wossner Piston and PEC Steel Rod Kit A20NFT Astra J VXR

3-5 Days Wossner Piston and PEC Steel Rod Kit
Wossner Piston and PEC Steel Rod Kit

Wössner are regarded by Europe’s leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress’s of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston.

This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns. Price includes all piston rings and gudgeon pins.

PEC's own in house design facilities are able to create many different components but for nearly 10 years now, it's our connecting rods that have helped set us apart from the competition in terms of availability, ease of fitment and size of range.

Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems.

H-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required.

PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike and their success record speaks for itself.

Pistons kits include rings and gudgeon pins. Steel rods are supplied with ARP200 uprated rod bolts.

86.5mm Diameter Recommended for engine rebuilds.

Write a review

Please login or register to review
  • Views: 1304
  • Product Code: K9490-G0280
  • Availability: 3-5 Days
  • £1,404.00
  • Ex Tax: £1,170.00

Available Options

Please Note: Plugs are listed individually.The Best Plugs to use for 1.6 Turbo (Z16LEx/A16LEx/B16LER..
£8.25
Ex Tax: £6.88
Uprated Exhaust Mount manufactured from a high temperature polyurethane material in red with a Shore..
£7.20
Ex Tax: £6.00
Shim for M32 Late Type End Case.To ensure correct shimming of the gearbox when fitting the later end..
£2.40
Ex Tax: £2.00
Genuine Vauxhall/Opel Clutch Cover to Flywheel Bolt for Z20LEH, Z20LEL, Z20LER 2.0 Turbo Turbo engin..
£0.60
Ex Tax: £0.50
Hydraulic Lifter, Genuine Vauxhall / Opel Original Equipment Part.Suitable for all:2.0 N/A and Turbo..
£7.50
Ex Tax: £6.25
Clutch Cover to Flywheel Bolt (M7x22) for C20LET and C20XEPreviously: 904441486 Required per Clutch..
£0.60
Ex Tax: £0.50
This mount replaces the original rubber bush for increased engine stability under acceleration and b..
£28.74
Ex Tax: £23.95
EBC Ultimax2 Brake Pad Set FRONT for:Astra H with 308mm Front Discs 2.0 Turbo 170PS/200PS / 1.9CDTi ..
£27.00
Ex Tax: £22.50
Longer Bolts and Studs required for fitting a Thermal Inlet Gasket to the 1.6 Turbo engine.For: Z16L..
£10.37
Ex Tax: £8.64
Genuine Bosch Inlet Manifold Pressure Sensor for 1.6 Turbo Z16LEx/A16LEx/B16LEx and 2.0 Turbo Z20LEx..
£42.00
Ex Tax: £35.00
EBC Redstuff Pads for K Sport 8 Pot (330 and 356mm kits) and D2 6 pot (330mm and 356mm kits)Calipers..
£114.60
Ex Tax: £95.50
Genuine Vauxhall/Opel Boxed Part.Heated Right Hand Side Side Door Mirror Glass (Aspheric) for Right ..
£20.70
Ex Tax: £17.25